The #6206 motor is used primarily in Golden two motor infinite position lift chairs, although it was used by Med Lift for awhile.  This is the main up & down motor attached to the base of the chair.

PLEASE NOTE: There are two versions of this motor: the older style 1.31.000.034.30 had three wires coming out of the motor housing; the longer cord went to the transformer, the short cord with the two pin female plug had the plug from the back motor plugged into it, and the short cord with the five pin female plug took the plug from the hand control.

The newer version 72276 Okin motor only has one cord coming out of the motor housing; that long cord plugs into the transformer, and the motor housing has two different sockets built into the motor housing.  They are difficult to see, but one of the sockets is on the front beveled part of the housing that the cord from the back motor plugs into, and the five pin socket on the side of the motor is where the hand control plugs in.  This change has caused a great deal of confusion, but if you have read this, you will know what to expect, and it will be very easy to plug everything in place.