The #6206A motor is used primarily in Med Lift heavy duty two motor lift chairs, although it has been used in the larger Golden chairs.  Chairs that have these motors have both motors mounted side by side to pick the chair up & down.  This motor has a cord with a seven pin plug that plugs into a control box under the chair.

PLEASE NOTE: These motors don’t go out very often; most of the time, if you have a motor not working on the chair, and the other motor is working, then just swap plugs at the control box.  If the suspect motor is now running, that proves that the motor isn’t the problem.  If neither motor is running, then the motors won’t be the problem then either.  Most likely, the problem will be in the hand control, or if you hear “clicking” in the box when the buttons are pushed, or if one motor is running and the other one isn’t, try ordering a control box, like our part #6280 first.